Skip to main content

Paramedian Approach to Neuraxial Anesthesia in Patients with Scoliosis

Download STL Files

This model is designed to support teaching and enhance understanding of the rationale for the modified paramedian approach to neuraxial anesthesia in patients with scoliosis (Huang J. Paramedian approach for neuroaxial anesthesia in parturients with scoliosis. Anesth Analg. 2010 Sep;111(3):821-2; author reply 822. doi: 10.1213/ANE.0b013e3181e6389a. PMID: 20733167.). It provides a visual representation of vertebral rotation and demonstrates the wider interlaminar spaces on the convex side.

The spine model was downloaded from https://www.embodi3d.com/files/file/17044-ct-tl-spine-scoliosis-stl-file-processed/. It was then modified to retain only the lumbar portion and to add intervertebral discs.

A base was added with a QR code linking to a Dropbox document adapted from the original article describing the modified paramedian approach in patients with scoliosis.

An expired epidural needle is heated and inserted into the plastic to visually demonstrate the needle trajectory. The needle is introduced from the convex side, approximately 1 cm lateral to the spinous process, and inserted perpendicular to the plane of the imaginary skin surface.


Print difficulty: Moderate

Material: PLA (2 colors)

Nozzle: 0.4

Layer height: 0.2

Supports: Organic supports, touching build plate only for the Spine, and no support for the base

Post-processing time: Approximately 15 minutes

Total filament required: Less than 250 g

The base should be printed separately using a 0.4 mm nozzle and a 0.2 mm layer height. For optimal QR code quality, begin with a dark filament, then pause the print and switch to white filament at 2.4 mm.

Paramedian Scoliosis (Video)